Return to Previous Page

Heat input 12kW (41,000 BTU/h).

Gas type: Liquid Petroleum Gas LPG.

Flame protection by 100% shut off thermo electric valve.

Ignition of pilot by piezo igniter.

Colours available. Corporate colour schemes can be provided for bulk requirements. 

Bottle cover houses up to 13kg LPG cylinder.

The unit incorporates a hollow base which must be filled with ballast before use (not supplied).

Standard overall height: 2260 mm

Width at widest point: 860 mm

  LOCATION & COVERAGE 
A single heater will provide warmth with a diameter of up to 6 metres, depending on weather conditions.  Maintaining a comfort level in a sheltered area is easier than in an exposed area.  If possible locate heaters in places sheltered from winds, near buildings, walls, fences etc.

Groups of heaters can be used to heat large areas, positioning them to give overlapping heat patterns.  This gives an all round radiant warmth for even greater comfort.

Telescopic Pole. Lowers down into bottle cover for hire operators.

Burner Cover Bag. For winter protection.

Tip Over Protection. Cuts off gas supply to burner if heater is tipped over.

Sack Trolley. To assist in transportation.

Factory Pre-assembly. Pre-assembly option (excludes ballast).

Special Colour Options. Corporate colour schemes and logos for special bulk order.

Alternative Heights. Extra high & lower height heaters can be supplied to special order.

Extended Guarantee. Available

  IMPORTANT - SAFETY 

Combustible Materials. Heaters must be located such that the indicated safety clearance distances from combustible materials are ensured.

Storage and handling of gas bottles must be carried out in accordance with local codes of practice.  After connecting the gas supply to a heater, always check for gas leaks using a soap solution.

Refer to the manufacturer's Assembly and Use Instructions for further information.

Designed for outdoor use only, with adequate high and low level ventilation.

  SAFETY CLEARANCE DISTANCES